Grants Microfuge PCV 2400

Grants microfuge pcv 2400

Grants Combined centrifuge PCV 2400 

The Grant bio Combi-spin PCV-2400 is a cost-effective fixed-speed combined centrifuge/vortex mixer for combined or independent centrifuge and mixing applications of microtubes and 0.2 ml microtube strips in low volume applications.

Tubes are loaded into the rotor for simultaneous spinning, then removed for individual mixing in the vortex cup located at the top of the central shaft. In spin-mix-spin applications, the Combi-spin can be used with reagent volumes down to approximately 50ml, representing an overall saving in time, labour and material.

Combi-spin aids the sample preparation process for many procedures including PCR, gel electrophoresis and enzyme reactions, and is particularly suitable for low volume applications. Other specific applications include immunoprecipitations; cell permeabilisation by chelating or hydrophobic agents for reaction in situ; low solubility drug testing; cell washing from culture media after fermentation.

Spin sped: fixed at 2400 rpm

The vortex cup emerges through an opening in the closed lid, enabling individual tubes to be mixed while a full load of tubes is spinning. The vortex mixer is activated by applying pressure to the vortex cup with a microtube

Very simple to operate - use the left-hand button to select continuous or short spin. A safety interlock stops the rotor when the lid is opened to ensure you and your workplace remain safe.

The Combi-spin is supplied as standard with two interchangeable rotors for 12 and 24 microtubes.

Optional accessory rotors - for 16 and 18 microtubes and for two 8-well 0.2.ml strips - allow for quick and easy changes of application.

Combi-spin PCV-2400

G-force

G

700

Speed

rpm

2400

Spin time

continuous up to 60 mins or short spin

Tube capacity

standard

12 × 1.5ml / 2.0ml

standard

12 × 0.5ml plus 12 × 2.0ml

Footprint

w/d

mm

225/180

Height

mm

115

Ambient operating temperature

°C

4 to 45

Input voltage

V

220 - 240

110 - 120

Input type

ac (50-60Hz)

Input current

A

0.63

Optional Accessories for Combi-spin PCV-2400


PR2-05
interchangeable centrifuge rotor for 8 x 1.5/2.0 ml plus 8 x 0.5 ml microtubes

PR2-05-02 interchangeable centrifuge rotor for 6 x 1.5/2.0 ml plus 6 x 0.5 ml plus 6 x 0.2 ml microtubes

PSR-16 interchangeable centrifuge rotor for 2 x 8-well 0.2 ml microtube strips

Technical Services

  • BLOOD STORAGE COMPLIANCE SPECIALISTS

Let our specialist team of engineers guide your blood bank to MHRA compliance.

  • TEMPERATURE MAPPING
  • REFRIGERATION MAINTENANCE/SERVICING {24 HOUR/365 DAYS PER YEAR}
  • CALIBRATION CERTIFICATION
  • ALARM SYSTEM VERIFICATION
  • GLP COMPLIANT PAPER TRAIL

C&M Scientific offer a total packaged solution for blood bank equipment compliance to MHRA requirements, using the latest calibration and mapping equipment.

To overcome the issue of -34 plasma freezer calibration and verification of alarms, we have purchased the new Ametek "JOFRA ATC-125" calibration bath (operating to -90 oC). This equipment is essential and the only sure way to achieve compliance.

Biostore

  • "The safest way to store your temperature critical samples" 
  •  Offering the widest possible range of temperature controlled storage
  • Repository based in central Scotland 
  • Secondary Site Storage
  • Use as part of your business risk planning
  • Reduce your footprint in  storage
  • Storing your valuable materials with confidence

Product Sales

We offer equipment that is guaranteed to beat any quote on price/delivery and service backup. Contact our Sales department on 08452 608601 for an unbeatable quote.

HP / Credit terms available

  • ULT FREEZERS
  • C02 INCUBATORS
  • GROWTH CABINETS
  • WATER BATHS
  • TEMPERATURE MONITORING SYSTEMS
  • COOLED INCUBATORS
  • PLASMA FREEZERS
  • BLOOD FRIDGES
  • PLASMA FREEZERS
  • COLDROOMS
  • CENTRIFUGES
  • OVENS
  • CONSTANT TEMPERATURE ROOMS
  • ENVIRONMENTAL TEST CHAMBERS
  • WATER PURIFICATION SYSTEMS
  • LIQUID NITROGEN
  • OXYGEN MONITORS
  • TEMPERATURE MONITORING SYSTEMS {PART II COMPLIANT}
  • SHAKERS
  • CLASS II HOODS